Stone fireplace in a living room after a fireplace makeover
Chimney Repair & Rebuilds

Brick Fireplace Makeover: Limewash, Refacing or Rebuild?

Chameleon Masonry
•
October 14, 2026

A dated brick fireplace can make an entire room feel older than it is. Orange brick, heavy mortar lines and a tired hearth are some of the most common reasons homeowners start thinking about a fireplace makeover.

The good news is that you have options. The right one depends on what you want the fireplace to look like and, just as important, what condition the masonry is in.

Here are the three main approaches and how to decide between them.

Start With the Condition of the Fireplace

Before choosing a finish, it is worth knowing what is underneath it. A makeover is the perfect time to catch problems that would be much harder to fix once new materials are on.

Look for:

  • Cracked or loose bricks on the face or hearth
  • Gaps or crumbling mortar in the firebox
  • Smoke staining above the opening, which can point to draft issues
  • A hearth that has cracked or separated from the floor
  • Signs of water staining from the chimney above

If any of these are present, repairs should come first. Covering a damaged fireplace with new stone or a fresh finish only hides the problem.

Option 1: Limewash

Limewash is one of the most popular ways to update a brick fireplace without changing its shape.

It is made from lime and water, and it soaks into the brick rather than sitting on top as a film. The result is a soft, chalky finish where some of the brick texture and colour still shows through.

Why homeowners like it:

  • It softens orange or red brick into warmer whites, creams and greys
  • It lets the brick breathe, unlike many paints
  • It can be wiped back while wet for a more aged look
  • It weathers gradually instead of peeling

Things to know:

  • The brick needs to be clean and unsealed for limewash to absorb properly
  • Results vary with the brick, so a test patch is always worth doing
  • It is not meant for the inside of the firebox

Limewash works best when you like the shape and size of your fireplace and just want to change the colour and feel.

Option 2: Refacing

Fireplace refacing means covering the existing brick surround with a new material. Popular choices include:

  • Natural or manufactured stone veneer
  • Thin brick in a new colour or size
  • Porcelain or stone tile
  • Smooth plaster or stucco style finishes

Refacing gives you a much bigger visual change than limewash. It can take a busy 1980s brick face and turn it into a clean modern feature, or give a plain fireplace a rustic stone look.

Things to know:

  • The existing brick has to be solid and well bonded for anything to be applied over it
  • Materials around the firebox opening must be noncombustible and installed with proper clearances
  • Refacing adds thickness, so mantels, trim and hearths may need adjusting
  • The firebox itself is a separate job and should be inspected at the same time

Option 3: Partial or Full Rebuild

Sometimes a makeover is not the right answer. A rebuild makes more sense when:

  • The firebox is badly cracked or deteriorated
  • Bricks on the face are loose or crumbling
  • You want to change the size or shape of the opening
  • The fireplace is being converted, for example from wood to a gas insert
  • Previous repairs have left the structure in poor shape

A rebuild lets you correct problems at the source and design the fireplace exactly the way you want it. It is a bigger project, but it is often the better long term choice for older or damaged fireplaces.

What About Painting?

Paint is the quickest change, but it forms a film over the brick. On a fireplace that sees heat and moisture, it can trap water, peel and be very hard to remove later. If you are leaning toward paint, limewash or a mineral based finish is usually a better choice for masonry.

How to Choose

A simple way to think about it:

  • Like the shape, dislike the colour: limewash
  • Want a completely new look: refacing
  • Damaged, outdated structure or a new layout: rebuild

Whatever you choose, have the firebox and chimney checked before work begins. A beautiful fireplace still needs to function safely.

Fireplace Makeovers in Barrie and Simcoe County

Chameleon Masonry helps homeowners across Barrie, Simcoe County, Muskoka and the northern GTA update, reface and rebuild brick and stone fireplaces.

We assess the condition of your fireplace first, then help you choose the finish that suits your home and will hold up over time.

Contact Chameleon Masonry today to request a quote for your fireplace makeover.

View Articles

Contact Us For A Free Consultation

Have questions or ready to start your masonry restoration project? Our dedicated team of masonry experts are here to help. Whether you’re exploring historical restoration, custom masonry modifications, or need expert brick repair, we’re just a call or click away.

Get Free Quote
Bricks, a mason's trowel and a yellow hard hat